Belt condensation granulator is to distribute the hot melt material in the upstream process on the steel belt moving at a uniform speed through the granulator distributor. A continuous spraying and cooling device is installed under the steel belt to force the material on the steel belt to move. With rapid cooling and solidification, Belt condensation granulator achieves the purpose of granulation and molding.

According to the physical properties and technological requirements, different types of granulator distributors such as external rotation type, internal rotation type, reciprocating type and gate type can be selected. According to physical properties and usage requirements, Belt condensation granulator can choose fabric forms such as intermittent dripping, continuous striping and full-width overflow to produce hemispherical, strip-shaped and sheet-shaped products respectively.
The application range of Belt condensation granulator is for all kinds of materials whose melting point (softening point) needs to be condensed and granulated within 250℃. Typical application materials are: sulfur, paraffin, resin, asphalt, maleic anhydride, partial anhydride, and stearic acid. Products, hot melt, m-phenylenediamine, urea, rubber and plastic additives, etc.
Belt condensation granulator adopts thin steel belt to transfer heat and forced spray cooling, so that the hot melt material can be quickly solidified and formed. Due to the reversing and bending of the steel belt at the discharge end, the bonding surface of the solidified material and the steel belt is separated. During discharge, there is less dust, the particle shape is completely protected, and the production efficiency is improved. The above is the main content of the Belt condensation granulator today. Now, let’s find out, if you need it, you can contact us.