Industrial Heat Exchanger is a heat exchanger composed of independent closed tubes that transfer heat by boiling the working fluid at one end and condensing at the other end.

Features:
1. The Industrial Heat Exchanger can completely separate the hot and cold fluids through the middle partition of the heat exchanger, and the operation of the heat exchanger will not be affected when a single heat pipe is damaged due to wear, corrosion, over-temperature and other reasons during operation. Industrial Heat Exchanger has high reliability for easy, explosive and corrosive fluid heat exchange occasions.
2. The cold and hot fluids of the Industrial Heat Exchanger flow completely separately, which can easily realize the countercurrent heat exchange of the cold and hot fluids. Both the hot and cold fluids flow outside the tube. Since the heat transfer coefficient of the flow outside the tube is much higher than that of the flow inside the tube, it is very economical to use in low-grade heat recovery applications.
3. For fluids with high dust content, Industrial Heat Exchanger can solve the problem of heat exchanger wear and dust blocking by changing the structure and expanding the heating surface.
4. When Industrial Heat Exchanger is used for waste heat recovery of corrosive flue gas, the temperature of the heat pipe wall can be adjusted by adjusting the heat transfer area of ​​the evaporation section and the condensation section, so that the heat pipe avoids the largest corrosion area as much as possible.