CaCl2 flaking plant manufacturers tell you that calcium chloride dryer is a common device for dehydration and drying of high-humidity materials. In the drying operation, according to the direction of movement of the hot air flow and materials, it can be divided into downstream drying and countercurrent drying. two ways. Here, we will briefly understand the outstanding features of the calcium chloride dryer using downstream drying.

1. The CaCl2 flaking plant manufacturer tells you that the calcium chloride dryer adopts a downstream drying method, that is, the high-humidity material and hot air enter the inside of the dryer cylinder from the same end of the cylinder, so that the wet material that has just entered it The temperature difference with the hot air flow is large. During the contact process, the moisture in the wet material will evaporate rapidly under the action of high temperature, which effectively reduces the loss of heat, especially for some materials with high humidity. It has a good drying effect .
2. The CaCl2 flaking plant manufacturer tells you that when we use the calcium chloride dryer to dehydrate and dry high-viscosity materials, we adopt the method of downstream drying to make the hot air with high temperature quickly exchange heat with the materials, so that the materials The moisture on the surface can be evaporated quickly, which effectively reduces the viscosity of the material and ensures the smooth progress of the drying operation. At the same time, during the drying process of some flammable materials such as coal slime, it can also effectively prevent high-temperature gas from directly contacting the materials, reducing the occurrence of safety failures.
3. The manufacturer of the CaCl2 flaking plant tells you that the calcium chloride dryer that dries downstream when used, after drying the material, the temperature of the output is low, and the need for a belt conveyor can well meet the needs of conveying materials . Therefore, does the calcium chloride dryer use the downstream drying method, and the required conveying equipment is simple and common.
4. The manufacturer of the CaCl2 flaking plant tells you that the calcium chloride dryer adopts the downstream drying method, and the negative pressure at the hot end is relatively low, which can effectively reduce the cold air entering the inside of the cylinder, thereby ensuring the drying inside the cylinder. Sufficient heat and stable temperature are more conducive to efficient and high-quality drying operations.