How to start the steel belt pelletizer


2021-09-27 11:40

At present, the production technology of the plastics industry is constantly improving. Among them, the commonly used mechanical variable is the Steel belt pelletizer, which can quickly interpret the masterbatch and accelerate the polyaddition reaction of polyurethane, thereby improving production efficiency and increasing corporate profits. Of course, there are many tricks when using it. Then, how to operate the steel belt pelletizer when it is started, the following, the steel belt pelletizer manufacturer will take you to briefly understand.

customized Steel belt pelletizer factory
How to start the operation of Steel belt pelletizer
1. Before starting, heat for about 40 to 50 minutes. Then increase the temperature, pull the motor V-belt by pulling it until it remains stable; pull it continuously for eight to ten times in the normal working direction. Then continue to heat for about ten minutes, and then turn on the machine, but continue to heat, because normal production needs to constantly add heat; adjust different temperatures according to different properties of plastics;
2. When the steel belt pelletizer is working normally, the temperature of the machine should be kept stable and should not be too high or too low. In the vicinity of the vent, the temperature should be kept at about 200 until the nose;
3. Feeding should be uniform, and there should be no shortage of materials. The feeding speed of the machine and the feeding speed should be appropriately matched. Otherwise it will affect the quality and output of the pellets;
4. When shutting down, the host should completely cut off the power supply. Need to remove the head plug (with wrench). It must be preheated separately before next use.
Pay attention to the temperature change of the body at any time during the operation, and immediately heat up when touching the sliver with a clean hand.
Through the above introduction, I believe you have a preliminary understanding of the Steel belt pelletizer, and we will continue to introduce you to the relevant content of the equipment in the future. Please pay attention to our company.

Latest News