CaCl2 flaking plant manufacturers take you to understand the advantages of calcium chloride dryer using downstream drying

The CaCl2 flaking plant manufacturer tells you that the calcium chloride dryer is a common device for dehydrating and drying high-humidity materials. In the drying operation, according to the movement direction of the hot air and the material, it can be divided into downstream drying and countercurrent drying. Two ways. Here, we will briefly understand the advantages of using downstream drying in calcium chloride dryer.

1. The CaCl2 flaking plant manufacturer tells you that the calcium chloride dryer adopts the method of downstream drying, that is, the high-humidity material and hot air enter the inside of the dryer cylinder from the same end of the cylinder, so that the wet material that has just entered it The temperature difference with the hot air flow is large. During the contact process, the moisture in the wet material will evaporate rapidly under the action of high temperature, which effectively reduces the loss of heat, especially for some materials with high humidity. It has a good drying effect. .
2. The CaCl2 flaking plant manufacturer tells you that when we use a calcium chloride dryer to dehydrate and dry highly viscous materials, we use downstream drying to make the high-temperature hot air quickly exchange heat with the materials, so that the materials The moisture on the surface can be quickly evaporated, which effectively reduces the viscosity of the material and ensures the smooth progress of the drying operation. At the same time, in the drying process of some flammable materials such as coal slime, it can also effectively prevent the high-temperature gas from directly contacting the materials, reducing the occurrence of safety failures.
3. The CaCl2 flaking plant manufacturer tells you that the calcium chloride dryer used for downstream drying, after drying the material, the temperature of the discharge is low, and a belt conveyor can be used to well meet the needs of conveying materials . Therefore, does the calcium chloride dryer use the downstream drying method? The required conveying equipment is simple and common.
4. The CaCl2 flaking plant manufacturer tells you that the calcium chloride dryer adopts the downstream drying method, and the negative pressure at the hot end is relatively low, which can effectively reduce the cold air entering the inside of the cylinder, thereby ensuring the drying inside the cylinder. The sufficiency of heat and the stability of temperature are more conducive to the efficient and high-quality drying operation.